From start to finish, each GT-R® engine is handcrafted by its own master engine-builder in a climate-controlled "clean room." Each twin-turbo V6 is precisely assembled from lightweight, highly durable aluminum and magnesium parts. It takes the exacting standards of the plant's most talented and devoted engine builders to produce the engine that ...
From start to finish, each GT-R® engine is handcrafted by its own master engine-builder in a climate-controlled "clean room." Each twin-turbo V6 is precisely assembled from lightweight, highly durable aluminum and magnesium parts. It takes the exacting standards of the plant's most talented and devoted engine builders to produce the engine that has redefined what a supercar can be.
We’ve also added advanced headlights that adjust their illumination pattern based on your driving speed, and an all-new interior option with pale ivory semi-aniline seats, and contrasting hand-stitched details.
A bearing is a machine element that constrains relative motion to only the desired motion, and reduces friction between moving parts. The design of the bearing may, for example, provide for free linear movement of the moving part or for free rotation around a fixed axis; or, it may prevent a motion by controlling the vectors of normal forces that bear on the moving parts. Most bearings facilitate the desired motion by minimizing friction. Bearings are classified broadly according to the type of operation, the motions allowed, or to the directions of the loads (forces) applied to the parts.
HEAD STUDS N BOLTS
Motec m84 ecu
A wastegate is a valve that diverts exhaust gases away from the turbine wheel in a turbocharged engine system.
A turbocharger, or colloquially turbo, is a turbine-driven forced induction device that increases an internal combustion engine's efficiency and power output by forcing extra air into the combustion chamber.
A nitrous oxide engine is an engine in which the oxygen required for burning the fuel stems from the decomposition of nitrous oxide (N2O) rather than air. The system increases the internal combustion engine's power output by allowing fuel to be burned at a higher-than-normal rate, because of the higher partial pressure of oxygen injected into the fuel mixture. Nitrous injection systems may be "dry", where the nitrox oxide is injected separately from gasoline, or "wet" in which additional gasoline is carried into the engine along with the nitrous. Nitrous oxide systems may not be permitted for street or highway use, depending on local regulations
Suits OEM retainers, 62lb seat pressure, 12.50mm maximum lift. Suits OEM retainers, 62lb seat...
Nominal Flow Rate – 1015cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F) Nominal Flow Rate – 1015cc/min @ 3.0...
Planning on cranking 45psi and above? Then you will need CA625 studs . These are the ultimate in head torque and are custom made for Paradise Racing. Planning on cranking 45psi and above?...
TB48 dish valves stainless steel 1.5mm TB48 dish valves stainless steel 1.5mm
TB48 flat valves stainless steel 2mm TB48 flat valves stainless steel 2mm
ATI custom nissan tb48 harmonic damper w/12 tooth trigger wheel ATI custom nissan tb48 harmonic...