Subcategories
CLUTCHES FOR MANUAL GEARBOX
RODS
VALVES
A wastegate is a valve that diverts exhaust gases away from the turbine wheel in a turbocharged engine system.
AIR FILTER
Heat Barriers / Reflect
A nitrous oxide engine is an engine in which the oxygen required for burning the fuel stems from the decomposition of nitrous oxide (N2O) rather than air. The system increases the internal combustion engine's power output by allowing fuel to be burned at a higher-than-normal rate, because of the higher partial pressure of oxygen injected into the fuel mixture.[1] Nitrous injection systems may be "dry", where the nitrox oxide is injected separately from gasoline, or "wet" in which additional gasoline is carried into the engine along with the nitrous. Nitrous oxide systems may not be permitted for street or highway use, depending on local regulations
sand tires are mainly used on off road vehicles, specifically designed for use in sand and mud. They consist of a smooth tire core which has a series of large rubber cups (or paddles) attached to it. The volume inside of a paddle is much larger than the void of a knobby tire, so it is unlikely to clog up with sand/mud. A street legal mud tire is a more or less normal tire, but with extra large gaps or "voids" between each tread block (called "lugs") to allow centrifugal force to "self-clean" or fling the mud out of the gap. Smaller gaps trap the mud in between the tire lugs, which turns the tire into something resembling a "slick" with no tread at all, which will have no traction in mud. A paddle tire is an even more extreme version of this, optimized for mud or sand.
Job Description. Car maintenance technicians repair and maintain automotivevehicles. Some technicians work on the entire car, while others specialize in a single area such as brakes or transmissions. Car maintenance technicians may work at gas stations, auto dealerships or car repair shops.
LINK AIR TEMP SENSOR (IAT1-8) LINK AIR TEMP SENSOR (IAT1-8) offer the fastest-response Inlet Air Temperature sensor which is suitable for both naturally-aspirated and forced-induction engines.1/8″ NPT thread – Either drill and tap your own hole or use the supplied alloy weld-on.mounting bosses available LINK AIR TEMP SENSOR (IAT1-8) LINK...
DEI REFLECT-A-GOLD™ - 24 X 24 HEAT REFLECTIVE SHEET Reflect-A-GOLD is an adhesive heat shield made from a metalized polyamide polymer laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't... DEI REFLECT-A-GOLD™ - 24 X 24 HEAT...
LINK 3 BAR MAP SENSOR (MAP3) MAP Sensor capable of reading of reading up to 3 Bar (2 Bar of boost).Includes 3 Bar MAP Sensor and plugs and pins. LINK 3 BAR MAP SENSOR (MAP3) MAP...
LINK 5 BAR MAP SENSOR (MAP5) LINK 5 BAR MAP SENSOR (MAP5) is specifically For LINK Ecu G4 & G4+ 5 bar MAP Sensor & Connector / Plug.The MAP Sensor is capable of reading up to 5 Bar (4 Bar of boost) Includes 5 Bar MAP Sensor and plug and pins. LINK 5 BAR MAP SENSOR (MAP5) LINK 5...